10 Burning Questions About the Crossover, Answered!
1/ How do you use the Buggy without the remote Control
Upon startup, when the display shows a flashing "0", the electronic brake function will be engaged, signifying that the buggy is prepared for use. Press the speed control knob on the handle to change the flashing "0" on the display to a solid "0", indicating that the buggy is ready to move. Rotate the speed control knob clockwise to increase the speed from 1 to 9, with higher numbers corresponding to faster speeds. To reduce the speed, rotate the speed control knob counterclockwise. Press the speed control knob to halt the buggy, prompting the number on the screen to flash and activating the electronic braking system automatically.
2/ How do I turn the Remote Control on to Start.
Upon startup, when the display shows a flashing "0", the electronic brake function will be engaged, indicating that the buggy is ready to use.
To power on the Remote Handset, press and hold the Lock Button (depicted as a padlock) until a small green light appears in the top left-hand corner of the remote handset. The Remote is now prepared for operation.
Please Note: If the Remote Handset remains inactive for 15 minutes without receiving a command, it will automatically power off. You can identify this by the absence of the small green light illuminating when any buttons on the Remote are pressed. If the Remote stops functioning and the green light in the top left-hand corner does not illuminate, you will need to repeat the Remote activation process.
3/ Where can I use the Buggy with the Remote and where should I not use it.
The best location to use the Remote is on the Fairway where there are no obstacles obstructing the path of the Buggy.
Avoid using the Remote in the Carpark, narrow pathways between holes, or any confined spaces where the Buggy may risk hitting obstacles or another golfer.
4/ How do I use the buggy in Free Wheel Mode.
In the unlikely event that your battery runs flat or if the display screen displays "L", which means that your battery is low or you need to activate the free wheel mode, follow these steps.
- Rotate the rear wheel knob 90° degrees clockwise to disengage the clutch. The rear wheel will now rotate freely with no resistance.
- Please repeat for second rear wheel.
- To deactivate the free wheel mode, turn the rear wheel knob 90°degrees counterclockwise until you can feel the wheel lock into place.
- Please repeat for second rear wheel.
Alternatively use the Neutral Mode on the Remote Handset: To engage Neutral with the remote, if you need to move the buggy manually for short distances (such as on the Tee Box), press the N button on the Remote Handset to deactivate the Electronic Brake Function. This will allow you to push the buggy effortlessly.
Press the stop button to re-engage the electronic brake function to revert to normal operation.
5/ How do I switch from using the Remote Control to the Manual Mode.
When in the remote mode, adjust the speed using the speed dial to switch from the remote mode to the manual mode, allowing you to operate and steer the buggy manually. Alternatively, while in the remote mode, press the speed dial on the handle to stop the buggy, and then start manually using the buggy again.
6/ How often do I need to charge the Remote
The remote handset should be charged at least once every 5 rounds, no longer.
7/ How do I engage Neutral with the Remote
To engage Neutral with the remote, if you need to move the buggy manually for short distances (such as on the Tee Box), press the N button on the Remote Handset to deactivate the Electronic Brake Function. This will allow you to push the buggy effortlessly.
Press the stop button to re-engage the electronic brake function to revert to normal operation.
8/How often do I charge the Buggy Battery
It is recommended to charge the buggy battery after each use, irrespective of the number of holes played. Adhering to this practice will contribute to extending the battery's lifespan.
9/ How do I clean and look after the Buggy to preserve its warranty.
After each round, make sure to clean your buggy by wiping away any debris, dust, or sand with a brush and/or a damp cloth.
Do not use a Pressure Washer or Garden Hose to clean your buggy, as this may cause damage to its electronic components.
10/ Where is the USB charging port located?
The USB charging port is located just under the speed dial on the handle.